PSah Factory

For most projects, I not only design, but also execute the work. For this one, though, because of distance, I only did the former.

The clients, manufacturers of packaging material in Cuttack, Orissa, wanted to construct a factory that was not just functional but, to the greatest extent possible, a green building in all respects. The product they make is hardly environmentally friendly, so it was somewhat ironic, but they had a genuine desire to make a change for the better so I agreed to take the assignment.

Design Principles

Initial concept

The initial conceptual structure had clerestory windows on the north and curved roofs to take maximum advantage of prevailing winds

Initially, the structure was to be of a single story only so, had that remained the case, the factory might just have looked like a variation on a theme with north-light roof trusses and curved metal roofs instead of straight ones.

Instead, and as luck would have it, the clients decided that they needed at least one additional floor to house the lighter machinery. Land in this area–alongside the Mahanadi river–is expensive and it would do them no good to scatter multiple structures all over the 2 acre plot. That posed a problem for the design as the clerestory windows would be of no use to the lower floor — either for light or ventilation.

View of Factory from the North-West

North West corner of the factory. This was the final design based on which the factory was actually built. You will notice that windows facing North are twice as large as those pointing West.

So, to allow for the clerestory windows to be used by both floors, I thought to turn them sideways. Back at the drawing board, I realised that only allowing windows on the North and East would mean the interiors of the factory would be dark for much of the day — not to mention that natural ventilation would be nil. On the other hand, too much light from the South or West was not desirable and neither was a draft that could carry in dust particles.

So I reverted to an undulating form–a double wave form in fact–that not only softens the factory outline but also works better for ventilation. Here the smaller waves face the South and West and the bigger ones face the North and East.

View of the factory interior

A rendering of the factory interior shows how the light enters indirectly

Now, when light enters, it reflects off the inner side of the baffle walls. Any heat that is generated remains in the immediate vicinity of the windows. Additionally, the upper of the two windows is bottom-hung to allow hot air to easily escape.

Between successive waves in the baffle walls, horizontal awnings protect the more conventional windows from the sun during the hottest times of the day.  In fact, sun-studies were carried out to ensure that the sun’s rays almost never directly reach the building’s interiors between 10:00am & 3:00pm.

Materials

Factory under construction

A view of the factory under construction shows the flyash bricks used for the walls.

Being a large structure which needs to take heavy loading, the framework and slabs had necessarily to be in RCC — a material that I avoid using when it is not required.

All the walls, including those of the baffles were from flyash brick and plastered only where necessary. Initially, we wanted to use the local laterite but that worked out much too expensive.

 

Some more photos of the construction

SVAGRIHA – a simplified version of the GRIHA Green Rating System

They’re calling it “Small, Versatile, Affordable” GRIHA – a less complicated green rating system for projects less than 2500 sqm. in area.   Quoting from the email they sent me:


ADaRSH (Association for Development & Research of Sustainable Habitats) is pleased to announce the launch of

SVAGRIHA
Small Versatile Affordable Green Rating for Integrated Habitat Assessment

A Rating system for small homes, offices and commercial buildings with built-up area less than 2500sqm

SVAGRIHA is a significantly simplified, faster, easier and more affordable rating system and will eventually function as a design-cum-rating tool. It was required that attention be paid to smaller buildings in India which although have small individual environmental footprints but their cumulative effect is far bigger. SVAGRIHA has been designed as an extension of GRIHA and has been specifically developed for projects with built-up area less than 2500sqm. SVAGRIHA can help in design and evaluation of individual residences, small offices and commercial buildings. The rating comprises of only 14 criteria (instead of 34 of GRIHA) and the interface comprises of simplified calculators. These calculators can be filled using information from construction drawings like areas and quantities of materials. This can be done easily by the architect of the project. Once completed, the tool will tell the consultant the number of points that they are able to achieve in that particular criterion and provide recommendations for any improvements in order to improve the environmental performance of the building.

Process of SVAGRIHA Rating

  • Registration of project with ADaRSH
  • Submission of completed calculators, drawings and other documents as required (quantity estimates) to ADaRSH
  • Assessment/Review as per SVAGRIHA
  • Site Visit and due diligence check post construction (mandatory)
  • Evaluation by GRIHA certified Evaluator
  • Award of Rating.

Note: The site audit to check compliance will be done once the project is complete and all equipment to be verified are installed.

For more information please visit www.grihaindia.org


GRIHA is the national green rating system for India developed by TERI and the Indian Government. I’ve always felt that GRIHA is far more suitable for us than (the more popular & better known) LEED rating system.

SVAGRIHA has just 14 criteria compared to GRIHA’s 34 and can act as a good checklist at the design stage.

SVAGRIHA CriteriaSVAGRIHA point groupsLooking at the point groups, I’m happy to note the weight given to Energy and Water conservation. At the same time, to achieve a rating, the design must achieve minimum standards in all categories. So while they say that 25 our of 50 points will give you a one star rating, adding up all the minimums means you actually need at least 28 points.  And finally, the table below shows the star rating that can be achieved.

SVAGRIHA stars

Planting for Birds & Butterflies

Plants that you should consider

There are a number of things you can do to attract butterflies and birds to your garden. Here is a basic list that may be useful as a starting point for people living in peninsular India. Please remember that this list is neither complete nor comprehensive because habitats vary so dramatically across our country. I’ve tried as far as possible to list local species but some, like the Lantana, have naturalised in our country and have therefore found a mention.

Grasses

A number of butterfly species lay their eggs on grasses – but not of the cultivated kind. Unless you have a very large plot, it is unlikely you’d want to allow these to grow. However, if the possibility exists, it is nice to let a patch of garden in a corner somewhere actually grow wild.
Bamboos are food for some butterfly species and refuge for many birds and other creatures. Keep them a little distant from your house if you’re petrified of snakes, though.

Shrubs and Creepers

Trees

Even if you live in the heart of a city like Mumbai, you will be surprised by the variety of birds you can see if there is enough greenery around. I’ve seen the beautiful Paradise Flycatcher in Breach Candy which is, barring a couple of tiny green pockets, as concrete a jungle as you can get.

Although the links above all point to wikipedia, a very good resource I have found for Indian plants is Flowers of India. The site aims at having comprehensive information about Indian flowering plants with their common names (especially in Indian languages), pictures and details of habitat and distribution.

Preventing Soil Erosion

Erosion of soil is a very real problem that can crop up when we encounter sloping land on a site. In this article, I’ll outline the measures taken on two different sites where erosion needed to be controlled. The first was done entirely via plantation and the second (where the foundation of a building had to be supported) involved terracing of the land — in conjunction with plantation of course.

Slope Stabilisation with Vetiver

In the year 2003, a client of mine wanted to buy an 11 acre plot of land along the Narmada river. It was a lovely location but the soil was very soft and powdery and the land was scarred by deep fissures where rainwater flowed down to the main river. What made it downright dangerous was that these steep gullies were collapsing at points and something needed to be done before parts of the plot got cut off and became inaccessible.

At the time, I suggested reducing the angle of the slopes and planting local reeds that grew along the riverfront to hold the soil. The first part worked but the second did not. The wild plants refused to grow where we wanted them to and something else needed to be found. That’s when she decided to try growing Chrysopogon zizanioidesVetiver (also called Khus).

What happened next was almost miraculous. The Vetiver took hold of the soil and bound it in a way that not only stopped erosion but allowed rainwater to seep into the soil instead of letting it all run off to the river. As a result, even the trees growing in the gullies got healthier and what looked like an almost barren landscape then, is now a great example of how working with mother nature is far more productive than trying to fight her. And plantation costs a fraction of what it would if we used “man-made” solutions.

What makes Vetiver different from other grasses is the fact that it’s roots do not form a horizontal mat like the others but grow downwards as far as 4m (13 feet). Another good thing is that it propagates in a way that makes it easy to control – so it doesn’t become an invasive weed.

To know more about Vetiver and how to use it for erosion control, go to the Vetiver International Network Website and download their manuals, videos and presentations.

Terracing the Land

Now, while I’ve been extolling the benefits of natural solutions, there are times when we simply have to use brick and mortar solutions when structural demands have to be met. The [RaBV] bungalow at Nasrapur was built on steeply sloping land and we not only had to prevent erosion but also make sure that the building’s foundations had rock solid support even if an earthquake struck. In such a situation, simply planting Vetiver, or any other vegetation for that matter, would never have been sufficient.

The first thing to do in the design was to follow the slope of the land as closely as possible. The main floor level was split with the living room sunk by about 0.6m (2 feet) from the rest of the house. Then, the verandah which projected by 2.4m (8 feet) beyond the house line was almost 1.8m (6 feet) above surrounding ground level so instead of filling it up, a little earth was excavated and an extra level – like a basement – was created below the verandah. Not only did this reduce loading on the peripheral foundation wall in a big way but is also served as a space for garden implements, a separate room for rainwater harvesting tanks and parking for a motorcycle.

The verandah effectively then, became the first terrace. Then, to buttress the foundation, a second terrace was created just in front of the basement. Here, we planted only shrubs and bushes – nothing with strong roots that might weaken the stone wall at some future date. Finally, we built a retaining wall to support the second terrace.

Maybe it was unnecessary to go so far but, when there is going to be no second chance to correct a mistake, you tend to err on the side of caution. Around the bungalow, on non-critical slopes, local vegetation has been allowed to grow naturally and has taken root well enough to protect against erosion.

Planting for Nature

The lives of birds and insects are so closely intertwined that you’re unlikely to have one without the other and both are extremely dependent on plants for shelter and sustenance. In nature, nothing works in isolation so, if you want to attract what are generally considered “beautiful creatures” to your garden, you have to be willing to accept the less popular ones. If you want butterflies, you will also have caterpillars and if you want birds you have to be willing to accept all manner of insects – some of which will attack your plants.

Despite that, it is extremely important to avoid chemical pesticides and fertilisers that will either kill them or drive them away. Unlike plants that are able to selectively repel certain types of creatures, man-made chemicals are less discriminating. Instead, if you want to keep the caterpillars (and other plant-eating insects) in check, make sure your garden also attracts birds. Butterflies and their caterpillars are themselves food for many birds and if the garden isn’t attractive to birds, the caterpillars will eat everything in sight. It’s just part of the balance of nature.

This page gives a list of trees and shrubs that you could plant to attract both, birds and butterflies. I have not given separate lists because the two of them pretty much sail and sink together.

Ways to Attract Butterflies

Creating a garden that consistently attracts butterflies is not all that difficult. You don’t necessarily need a lot of space – although that naturally helps – but you will need to learn a bit about these beautiful creatures before you begin. What this page will give you, is only a primer to start you off because the species of butterflies found in different parts of our country vary quite dramatically.

The first thing you need to provide if you want to attract these beautiful creatures to your garden, is a habitat they can be comfortable with. This means planting everything from dense shrubs that shelter them from predators and rain to tall trees (which some of the larger butterflies frequent in an activity known as “tree-topping”) while also leaving open space for them to bask close to the ground. Being cold-blooded insects, they need to warm their wings in the sun before they can take flight in the morning.

The second thing you need to do is bribe them outright! Many (though by no means all) adult butterflies feed on the nectar of flowers. In doing so, they act as couriers for the pollen grains that stick to their bodies, thereby helping in pollination making it a symbiotic relationship. By and large, butterflies prefer to visit multiple small florets as opposed to single large flowers so you might want to look for plants that have these characteristics. It is helpful to have a variety of plants so that their different flowering seasons ensure availability of nectar through the year.

The third important thing that most people don’t realise is that it is not enough to merely attract the adults; if you want their continued presence, you must provide for their young as well. Caterpillars (and here’s something you might not know) are very specific about the plant they feed on. Caterpillars of any given butterfly species will only feed on a single plant species or sometimes a bunch of related plant species. For instance, many of the smaller lycanid caterpillars will only feed on grasses while, say, a tiger butterfly will hunt for a certain milkweed (Calotropis) on which to lay her eggs – and a Red Pierrot caterpillar will restrict itself to the fleshy leaf of Bryophyllum. Put the red pierrot caterpillar on a tree full of juicy green leaves and it will simply die of starvation.

One more thing that is easily provided and will attract a lot of male butterflies during the dry months is a patch of damp earth. Males flock to such patches for “mud-puddling” wherein they get salts and other nutrients from the soil which they need to be considered eligible by the females. And if you really start getting addicted to butterflies, you can also bait some species with rotten and fermenting fruit; the little alcoholics will simply love you!

How to Attract Birds

Like butterflies, birds also require a variety of plant types to make them visit your garden. Some birds like thrushes and babblers prefer to forage in the shade, Sunbirds go to nectar-rich flowers while parakeets and Barbets want to get at fruits and seeds that are usually found in the larger trees like the fig. One therefore needs to plant a tiered garden with patches of sunlight on the one hand and dense shade on the other. Also, birds usually prefer local vegetation so keep that in mind when you do your plantation.

Install a bird-bath. It’s not very difficult to make and as long as you don’t have cats as pets (or neighbours), the birds will give you hours of enjoyment. There are numerous pages on the internet that explain how to make a birdbath. Just one thing to remember is that if you leave the water stagnant, you will be breeding mosquitoes – not a pleasant thing.

The trees you plant should be dense and shade-giving. These will give great shelter for roosting or even nesting. And if they happen to be fruit-bearing, that is even better. Bushes, especially flowering ones, should be planted around the trees in clusters instead of scattered all over the place.

As with any nature-friendly place, you should avoid (or at least minimise) the use of chemical fertilisers and pesticides. Pesticides will eliminate a broad range of insects and spiders some of which you may not be very keen on but which are extremely attractive to our feathered friends. A garden devoid of insects will get very few birds visiting especially during the nesting season when they’re foraging for their young. Nothing exists in isolation in nature and if you want to look at pretty creatures, you’ll have to learn to look at and enjoy the ones that aren’t as popular.

Appropriate Plantation

There is a raging debate among naturalists about the desirability of cultivating exotic plant species and there are no easy answers. My own view is that we should try our best to avoid introducing any new species into an existing ecosystem but there is no need to get worked into a froth if a species has naturalised over a substantial period of time. Yes, there are places where exotic species have become very invasive at the cost of the local varieties and there may be a case for culling them – but such a discussion is beyond the scope of this article. Instead, we are going to focus on the use of exotic and native species in the context of what is appropriate landscape architecture in a predominantly hot country like India.

Improving Comfort Levels

Trees are often the first line of defence when it comes to passive cooling of a bungalow or other low-rise structure. They provide shade which prevents the build-up of heat not only on the ground but also on the walls of the building. Shade on the ground means the breeze coming in through your window is cooler and shade on the walls means less heat gets transferred indoors. Aside from shading, trees also cool by transpiration to the extent that they can, if properly located, reduce ambient temperatures by as much as 5° compared to the surroundings.

So what kind of trees should we plant, and where?

While the finer details vary across different parts of the country, broadly it is safe to say that the hottest sides are the South and West so, if you can concentrate on protecting these directions with dense evergreens, you’re good to go. On the East, you might want to have high-branching trees that won’t block your early morning sun and on the North – depending on whether you get direct sunlight penetration or not – you could grow colourful, possibly deciduous trees. You have to be careful during plantation that you leave enough distance between the tree and your foundation because many of the large trees have strong spreading roots.

Trees, even in urban areas (albeit to a lesser extent), are part of an ecosystem and need to treated at as such. If they are native, they will invariably be well integrated into that ecosystem along with the local fauna like the birds and butterflies. An introduced plant is unlikely to be so well assimilated and may therefore not contribute in a positive way. There are plants that have been naturalised over a long period of time but I’m referring to those that have been introduced because they are ornamental or because they grow rapidly. Usually the ornamental ones are fragile and drop their branches on your head at the beginning of the monsoon and the fast-growing varieties with their short life-spans often sap the soil so severely that nothing else grows there for years after they’re gone.

Usage of Water

This is a very important factor to take into consideration especially if you’re thinking of sustainable landscaping. Many ornamental trees and bushes are extremely high-maintenance and don’t even get me started on lawns. They may look very pleasing to the eye but, with few exceptions, they guzzle frightening amounts of water and are often heavily sprayed with chemical pesticides — which naturally leech into the groundwater.

Here, a very important argument for using native species is that they will, by default, survive with the naturally available moisture and precipitation. Of course they may need some amount of watering when they are saplings as also during the hot summer months but, in general, their water requirements are a small when compared to exotic ornamentals.

Rational Vastu 2.0

This book is free to read, download & shareAs an Architect, I have often been confronted by my clients’ blind faith in the Vastu Shastras — the ancient building code of India. At first, I dismissed it out of hand; but the trend refused to die. Finally, I decided to take a closer look at this phenomenon, hoping to gather enough evidence against it.

To my surprise, I found that when seen in totality, it conflicted very little with my professional training. The Vastu Shastras are, basically, rules for holistic architecture. However, that is only the good news.


Icon
Rational Vastu 2.0 | The Science of Sustainability


The scientific basis of the Vastu Shastras has been reduced to mere superstition by self-styled experts

The bad news is that it has been turned into a monster of superstition by a number of so-called experts. They have crawled out of the woodwork to make a very fast buck by preying on people’s insecurities.

This booklet was written because the non-professional has no way of understanding the first thing about these ancient texts. It explains in simple terms, the origins and meaning of the Vastu Shastras.

While this book is not intended to be a comprehensive encyclopaedia on the subject, a thinking person will quickly learn to differentiate between the genuine code and outright superstition.


CC | BY-NC-NDThis book is distributed under a Creative Commons License v.3.0 and you may distribute it freely provided that it is non-commercial, unmodified, and attributed to the author.

Welcome to bT Square Peg

Based in Bombay (Mumbai) bT Square Peg has been creating sustainable designs in architecture & interiors since 1993.  The primary intention is to seamlessly blend practicality & timeless aesthetics with sustainability — the resources on this planet are not limitless.

design principle:
to seamlessly blend practicality, aesthetics & sustainability

Many designers care more about how the job will look in a magazine article—preferably the cover feature—than it does in reality. This often leads to homes and offices that look very dramatic in photographs but don’t necessarily work in practice. Equally, there are clients who fall into the trap of wanting to showcase the latest rage. Both approaches are wrong in my opinion.

The principle here is to keep in touch with current trends and materials without becoming a slave to transient fashions. Ultimately the objective is to create spaces that are—both physically and aesthetically—appealing to the inhabitants.

Featured Projects


[ShKo] Bungalow

Nasrapur, Karjat [2012-2015]

Courtyard and swimming tank seen through a brick jaliWith rooms arranged around an open court that has a swimming tank, this bungalow is the weekday home of a couple who come into the city mostly on weekends.

Instead of a typical compact layout, this house was designed as a series of spaces with clear public and private zones. When seen from a nearby hill, it looks like a cluster of three houses rather than just a single one.


Satya Health Resort

Vanjarwadi, Karjat [1999-2001]

Entrance aangan to a cottageNestled in a valley between the Matheran and Bhimashankar ranges, on a 50 acre (20 Hectares) piece of land, this is a resort with a difference. It was designed to have the look and feel of a typical Indian village.

The layout reflects the variable contours, with groups of ground-hugging cottages following the gradients. Some units are arranged in a cluster around a central courtyard, while others have individual aangans from which one enters them. Including the unpaved, covered, otlas behind them, each room has almost as much outdoor space as it does within.


Handloom Training Centre

Maheshwar, MP [1994-1996]

Entrance to Kaya KalpBuilt in the historical fort of Maheshwar — old capital of the Holkar kingdom is this training centre for handloom weavers. It was built using only locally available materials and labour, which brought the cost of construction down to a surprising Rs. 1,125/m² (about Rs. 105/square foot). Today that figure sounds almost unreal but, even at that time, it had worked out to approximately one-third of what a similar, concurrent project in the same town had cost.

The walls were made entirely of load-bearing brick with no reinforced concrete whatsoever, and the mortar used was a mixture of lime and cement.


Recycling Water

Apart from saving fresh water there are also some ways of reusing and recycling water so as to reduce our requirement. The technology for this could be hi-tech, like a filtration plant, for example but we will concentrate on basic low-cost solutions here.

Grey Water for Flushing

When we bathe, wash our hands, wash our clothes or get the house swabbed, the discharge that goes into the drain is known as ‘grey’ water (as opposed to ‘black’ water from the toilet). Grey water is sometimes soapy and sometimes contains large amounts of dirt. On occasion, it may have a slight smell but, on the whole, it harbours no harmful pathogens.

This grey water requires only a minimal amount of treatment before it is good enough to use again. You may not want to drink it or even bathe with it but, in fact, you don’t have to come in contact with it at all. You can simply reuse it for flushing.

Apart from reducing your water consumption by almost 50%, if you have a septic tank, re-using grey water has an additional side-benefit that the black water no longer gets diluted by the grey water and, as a result, decomposes more efficiently. Even if you don’t want to build a separate treatment section for grey water, the least you can do is put it into your plants.

Reuse Water for Landscaping

The discharge from your kitchen, bath and washing machine is not harmful to plants so, if you have your own garden, you can always release this water almost directly. In case the food you eat is relatively oily, it might be necessary to install a small grease-trap to take first remove grease from the kitchen waste.

I know someone in the city of Pune who, for years, has released grey water from the kitchen and bathrooms of his bungalow straight into a clump of lush Papaya trees. I asked him pointedly about the chemicals in the soap etc. and he just laughed. He is, by the way, an graduate in agriculture so I guess he knows what he’s laughing about.

The explanation is this: chemicals in detergents and cleaning agents are considered bad because they promote the growth of algae. In fresh water, algae deplete the oxygen which, in turn, kills the fish and other fauna there. But these same chemicals – among them phosphates – also act as growth promoters for trees and are, therefore, excellent for landscaping.

Sewage Treatment

Section to be added…

External Links

To be Added


More

If you are the manufacturer/dealer of any product that you feel is appropriate for this page, please fill this form stating clearly what exactly makes your product green/sustainable.

Please note that Greenwashing will not get you anywhere and inclusion of the product is not guaranteed and is entirely at our discretion.

Saving Water

There are literally thousands of sites on the internet which will show you ways of saving water. Some boast of having the 100 best tips while others give you five; but almost all of them are useless to us here in India. We don’t clean our cars with a hosepipe (we pay a cleaning ‘boy’ who uses a tiny bucket with a mop) and we don’t water our lawns every week – we don’t usually have lawns to water in the first place. So, on this page, let us not go on about obvious things like “don’t keep the tap running when you brush your teeth”. Let us look at systemic solutions instead, this is an architectural website, after all.

Low-flow Taps and Showers

From an average shower head, the flow averages 8 to 10 litres each minute. So for every 10 minutes of showering, you use between 80 and 100 litres of water. With a bucket, on the other hand, you are likely to average around 15 litres. That is a huge difference and for people who dislike using a bucket, a huge weight on their conscience – or so I would like to believe.

Similarly, though on a smaller scale, when we run a tap, we tend to use more than we really need; but fiddling with a mug while you’re rushing to shave in the morning can be difficult. So we have to look for some other solution to this problem.

If you are willing to, you can simply change the shower-heads and taps to ones that allow a lot less water through. They are classified as ‘low-flow’ and are still quite a rarity in India. They have a design that aerates the water so that although it feels like a good flow, a lot less water is actually consumed. At the same time, the apertures through which the water passes are kept tiny so that the water is forced through and hits you with the same force as a full-flow shower or tap.

Low-flow showers use about 3-5 litres/minute so a 10 minute shower now costs you 35 litres instead of, the average 90 – a saving of 55 litres. Low-flow taps (don’t forget the kitchen sink!) save at least 15 litres per person each day.

If you think that is not much, remember that you save over 25,000 litres every year. Per person! For a family of 4, that’s more than one lakh litres! And if you’re willing to go the bucket and mug route for your bath, you – as an individual – will save almost 30,000 litres per annum.

For the record a lot of people absolutely hate low-flow fittings. In fact there are people who complain that even normal showers flow too slowly for their liking and they actually install on-line pumps to increase the water pressure. If you are one of these people, I know you are going to say that just one person makes no difference. Ummm… Twenty Five Thousand Litres is no difference? Really?

Dual Flushes

Another major way to save water is by changing your flushing system. A normal flush uses 10 litres each time – regardless of whether the bowl contains 100ml of urine or the sum and substance of your latest bout of diarrhoea. On an average day, a person goes for a big job a couple of times and urinates about eight times. With a normal flush, that means you send 100 litres down the drain in 24 hours.

Dual flush systems allow you to choose whether you want a full flush (usually ~5 litres) or just half (~2.5 litres).

Eight urinations + two big jobs:
Grand total for the day : (5×2)+(2.5×8) = 30 litres
That is a saving of a whopping 70 litres which totals 25,550 litres each year. Knock off the 550 litres for all those times when your spouse/parent/teenage offspring complains that “it did not flush properly the first time” and round off the figure to 25k. Not bad, what?

It is a common misconception that such flushes don’t do a good job with the big job. What determines whether the stuff goes away quietly is not so much the amount of water as the design of the toilet bowl itself. Attaching a low-flow cistern to a potty that was designed for twice as much water is not necessarily going to give you good results.

Almost all the major sanitary ware companies make dual flush tanks with matching WCs. Also, recent municipal rules, at least in Bombay (Mumbai), insist that only dual-flush cisterns may be used in all new construction. Some manufacturer links are at the bottom of the page.

Stop that Leak!

Little drops of water make the mighty oceans. If you let all your taps leak all day long for the rest of your life, you would still be unable to fill the Pacific. But you could, very well, fill a large lake. A tap that leaks just a single drop every second, wastes almost 12,000 litres each year. That means throwing away approximately half as much water as you could save by changing your flush tank or by installing low-flow taps and showers.

Do you have a dripping tap? Try the American Water Works Association’s drip calculator to see how much you’re really wasting.

Not getting leaky taps fixed is usually nothing more than laziness on our part because we don’t realise the extent of the problem. That excuse no longer washes, so if you are not handy with a wrench, go call that plumber. And place a bucket under the tap while you wait for his highness.

Choose your Appliances Wisely

Washing machines and dishwashers consume water that would otherwise be used to manually clean your clothes and dishes. While the latter are still relatively uncommon in India, the former are found in most urban homes. So what should you look for when you go to buy one? Aesthetics?

A friend recently wanted a new washing machine that consumed the least possible water. We went to a reputable store that has branches all over town. After looking around, it boiled down to two front-loading machines – let us call them ‘E’ (for a famous European brand) and ‘A’ (an equally famous East Asian company). Front-loaders, by the way, are far more water efficient than top-loaders.

Anyway, we naturally asked the salesperson which model used less water. He hesitated just a fraction and then told us that ‘E’ used 90 litres on a full load while ‘A’ used only 60 litres. This I found surprising because I already had an ‘E’ that used only 49 litres and I mentioned this to the salesman. The latter was adamant and it led to a bit of an argument until we asked him to bring us the technical specifications for both models.

It turned out that ‘E’ does use 49 litres on a full load and ‘A’ uses around 55 litres for the same full load. The point I am trying to make here is that salespeople are usually not trained to answer questions like water consumption and most are not trained to say “I don’t know but let me find out” either. So do not believe what you are told – ask for the printed specifications.

So, Will You?

You can see that the overall saving for a normal user can be anything between 25,000 and 50,000 litres each year. Of course, it will cost you a few thousand rupees and, because water is subsidised in India, you may not recover the financial investment for quite a while. But think of the environmental benefits. You must be concerned; you would not be reading this page otherwise. Fifty Thousand Litres. And that’s just from one person. Go ahead. Make the change. You won’t regret it.

Oh, and if you are seriously thinking of water harvesting then this will actually translate into a lot of money because the cost of storage tanks will immediately drop by almost half.

External Links

Cera Sanitaryware, India
Hindustan Sanitaryware, India
Kohler Sanitaryware, India
Water-saving showerheads. US site
Drip Calculator


More

If you are the manufacturer/dealer of any product that you feel is appropriate for this page, please fill this form stating clearly what exactly makes your product green/sustainable.

Please note that Greenwashing will not get you anywhere and inclusion of the product is not guaranteed and is entirely at our discretion.